Ghost Immobiliser Fitting
Guard your car from theft of keys hacking, cloning and theft by using the world's first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be linked to the immobiliser to send you alerts when your car is stolen or tampered with.
Installing an Ghost immobiliser is relatively straightforward for the skilled technician. It is important to have the proper tools and heat shrink tubing.
Getting Started
Ghost immobilisers are a great alternative to physical theft protection devices like car alarms and wheel locks. They protect your vehicle without the use of LED indicators or key fobs. They connect directly to the ECU CAN data network and are activated only after entering a PIN. This provides a higher level of protection against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high degree of agility and accuracy. It's like walking through a minefield. A single mistake could cause serious damage to your vehicle's circuits. To avoid this, it's vital that you know the installation process and prepare your vehicle accordingly.
First, you need to prepare the vehicle by removing interior panels to allow for the immobiliser unit. Once you've found the ideal location to hide it put it in place by using cable ties to stop it from being taken away or tampered with. Then, tidy up the wiring by tying loose wires and using insulation tape or heat shrink tubing to cover exposed connections. This will help to reduce the risk of accidental short circuits as well as improving the aesthetics and decreasing the likelihood of tampering by thieves.
Find a source of continuous 12V power and a grounding location for the ghost immobiliser. Once you've found these and tested the power wires using a multimeter, to ensure they're delivering a consistent voltage. Connect the CAN H and CAN L wires from the immobiliser to the designated power source and grounding point.
It's important that you check all connections and inspect the immobiliser to check for indications of corrosion. Entering a PIN and starting the vehicle is a great method of testing the system. This should be a regular part of your routine, since it can help you detect any issues that might be intermittent early. Regular testing can help to extend the life of the device, and keep it functioning at its best.
Preparing the vehicle
The installation of the Ghost immobiliser is a complex job that requires the appropriate tools and expertise. A wiring diagram is necessary for locating the correct wires, making accurate connections, and ensuring safety. A multimeter can be used to check the electrical properties and ensure security. Insulation tape and cable tie can be used to secure connections and protect them from alteration. Finally, a user guide will provide specific directions specific to your Ghost Immobiliser model.
Once installed, a ghost immobiliser can stop an unauthorised engine from starting by requiring the driver to enter a unique PIN sequence using buttons on the steering wheel or center console. The code can be altered at any time by the vehicle owner by hand or remotely through a mobile app. The device is also silent and unnoticeable by thieves because it doesn't emit radio frequencies.
A ghost immobiliser is connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by the ECUs and blocks the engine from running if the ECU detects a false signal. The system is tamperproof and weatherproof, with no key fobs or LED indicators to draw the attention of thieves.
It can be mounted behind or in a less visible area so that it's not visible to thieves, and doesn't interfere with the vehicle's performance. It can be tucked away in a small container, so it is less likely to be noticed by fraudulent salespeople when they test drive.
Its discrete operation and integration with the vehicle's CAN bus system make it a powerful deterrent to the latest methods of car theft, such as key cloning and signal relay attacks. The system can be integrated with other security measures to create a powerful barrier that will frustrate even the most ardent thieves. Many insurance companies suggest or require ghost immobilisers because they can lower monthly premiums.
Making the Connections
Ghost immobilisers are completely silent unlike traditional security systems which can be heard by thieves. They prevent thieves from knowing that your car is running. immobiliser ghost block high-tech methods used to steal vehicles for instance, OBD port hacking. They can also be fitted without causing permanent marks in your car which makes them a great option for those planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and modern solutions to prevent car theft. It uses the CAN data network to deactivate your engine and generates a pin code that only you know, which means it's difficult for criminals to recognize. It can be used on a wide range of automobiles, and it can work with many features already installed like car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you choose to install a Ghost immobiliser, make sure to refer to the wiring diagram of your specific vehicle model to determine the wires that need connecting. Check their locations to ensure they are exact, and label them or tape them to help you remember them. You'll also need to locate a consistent power source (12V) for the system and a grounding. Once these are in place, you can start to make the connections needed to complete the installation.
The ghost immobiliser won't allow your vehicle to start unless you enter a pin code via the buttons on the dashboard or steering wheel. This will stop ECU hacking, key cloning, and other methods of vehicle theft. It can also be used with other Thatcham approved security accessories such as alarms and tyre clips to give your car an additional level of protection.
As the UK automotive aftermarket industry grows as do the options for securing your vehicle. With so many ways for thieves to get in and take your car it's essential to do all you can to ensure it isn't stolen. This is why ghost immobilisers are such a popular choice among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via a CAN network. This prevents the engine from starting until a PIN code has been entered. This makes it very difficult for thieves to copy your key fob and start your car, and even more difficult to disable the system by hacking into its electronics.
Ghost Immobilisers are also able to be utilized together with GPS tracking devices that can aid in tracking your vehicle's location and identify it if it's stolen. This feature is not an option that is commonly used in aftermarket security solutions however it's a great method to enhance your security and provide peace of mind knowing your vehicle is always protected.
In addition to offering enhanced security in addition to providing enhanced security, the Ghost-II immobiliser provides a simple user experience by removing the need for additional key fobs or devices. It features a simple, intuitive PIN code entry that can be integrated seamlessly into your daily routine. Additionally, it provides deactivation modes and convenience features that let you temporarily disable the immobiliser valet parking or for servicing.
Before beginning the installation process, familiarise yourself with your vehicle's wiring and prepare the necessary tools. A basic set of tools will enable you to create precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat shrink tubing are also essential for protecting connections from short circuits and cable tie is a great way to hold the wire in the right place. It is also essential to work in an area that is well-lit and wear protective gear when working with electrical equipment and components.
You should test the Ghost immobiliser after you have completed the installation to ensure it is working properly. First, you need to try to start the vehicle without entering the PIN code. If this fails, you'll have to retest the system and perform a more thorough inspection of the connections.
In contrast to other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is more effective than traditional deterrents like wheel clamps or steering locks. what is a ghost immobiliser is TASSA-approved, and recognized by some insurance companies. This makes it a cost effective investment that gives you the peace of mind you deserve.